Number of search result: 13
KITS, Pressure
PRESSURE/VAC-111
PRESSURE / VACUUM COMPOUND GAGE-111 (5 to 30 psi)
The intent of the PRESSURE/VAC-111 ILC/PT is to provide a means for the participant laboratory to determine the appropriateness and effectiveness of participant practices, training, and measurement uncertainty calculations relating to the measurement of Pressure and Vacuum.
This kit contains a compound Pressure/Vacuum Gauge. Participants will be asked to make 5 Pressure measurements between 5 and 30 psi, as well as 5 Vacuum measurements between 5 and 25 inHg on a digital gauge having 0.01 psi resolution.
Participants are expected to be familiar with, and have appropriate lab equipment and measurement uncertainties for calibration of similar devices.
KITS, Pressure
PRESSURE-211
Digital Pressure Gauge (100 to 1000 psi)
The intent of the PRESSURE-211 ILC/PT is to provide a means for participant laboratories to determine the appropriateness and effectiveness of participant practices, training and measurement uncertainty calculations relating to the calibration of a 1000 psi Digital Pressure Gauge.
Participants are asked to make a series of ten pneumatic pressure measurements between 100 and 1000 psi. The artifact resolution is 0.1 psi. The artifact accuracy specification is 0.1% FS from 20 to 100% of Full Scale, and 0.02% FS from 0 to 20% of Full Scale.
Participants are expected to be familiar with, and have appropriate lab equipment and measurement uncertainties for calibration of similar devices.
KITS, Pressure
PRESSURE-302
Hydraulic Pressure Transducer (0 to 70 MPa)
The PRESSURE-302 ILC-PT is intended to provide a means for laboratories to validate their Hydraulic Pressure calibration practices over a range of 10 to 70 MPa (approximately 1459 to 10,153 psi).
This transducer provides the laboratory an opportunity to demonstrate calibration in the metric equivalent, Mpa. The manufacturer specification for the artifact within the test range is 0.004 to 0.009 MPa depending upon set point.
Participants are expected to be familiar with, and have appropriate lab equipment and measurement uncertainties for calibration of similar devices.
KITS, Pressure
PRESSURE-311
Digital Pressure Gauge (0 to 1000 psi)
The intent of the PRESSURE-311 ILC/PT is to provide a means for participants to evaluate the appropriateness and effectiveness of their practices, training, and measurement uncertainty calculations relating to the measurement of Pressure, 0 to 1000 psi.
Participants are asked to perform 11 measurements, on increasing and decreasing scale from 0 to 1000 psi. Resolution of the digital artifact is 0.01 psi. Pressure medium - use only clean, dry non-corrosive gases (pneumatic). Manufacturer specification for artifact accuracy is 0.01% FS (FS = 1000 psi).
Participants are expected to be familiar with, and have appropriate lab equipment and measurement uncertainties for calibration of similar devices.
KITS, Pressure
PRESSURE-515
Absolute Pressure Gauge (0 to 25 psia)
The intent of the PRESSURE-515 ILC/PT is to provide a means for participants to determine the appropriateness and effectiveness of their practices, training, and measurement uncertainty calculations relating to the measurement of Pressure in the range of 0 to 25 psia.
Participants are asked to make 11 pressure measurements from 0.0 to 25.0 psia in ascending and descending set points. Measurement values will be appropriate for calibration of similar devices.
Participants are expected to be familiar with, and have appropriate lab equipment and measurement uncertainties for calibration of similar devices.